Whimsy. . . an excessively playful expression . .

I think the title fits the fun I’ve been having making woven copper branches and adorning them with depictions of nature.

The woven branch idea happened quite by chance. I was meeting a friend and knew I would be too early for our appointed time; so, as usual, I took along some wire work. Yes, I’m worse that a compulsive knitter! I planned to work on a bracelet like those shown in a recent blog. I cut the wire strips and copper sheet before leaving the house and stuck them in my bag. Unfortunately, when I pulled things out in the car to work on the bracelet, I had left the sheet out of the bag. So, there I sat in the Academy parking lot wondering what I could do with four 9 inch lengths of heavy copper wire and a spool of 26g weaving wire.

Yes, I could have just sat there and waited patiently, but creataholics don’t do that! I put those four heavy wires together like a column and started weaving around them in a circle. The pattern was rather addictive and fun to try. Later, when I returned to the piece, I realized it resembled (in my imagination) a branch and I added leaves here and there.

I had already made couple of little torch enameled butterflies and they lit right on that branch. Whimsical?

The next day I tried 5 base wires in the column and liked it better, although it took longer to complete. I used an owl bead on this one.

Now I’m filled with ideas pertaining to other things that need to go on these branches. Yet, I guess I’d best see if anyone else likes them first. Even if they aren’t winners, it good to go out on a “whim” once in a while!

I spent so many years learning about and teaching about creative thinking that it’s really fun to get to actually “DO” creative thinking. No matter what I’m making, I find myself asking “how many different ways can I ……?” This phrase is generated following the ideas of Alex Osborne about fluency. One of my other favorite phrases from the formal Creative Problem Solving procedure (Trefinger) is “In what ways might I . . . ?”

One of the tasks this week has been considering those two questioning phrases in terms of a new woven bracelet I’m developing. The form utilizes a simple weave wherein two outer pieces of wire are woven together with a copper strip about 1/2 inch wide. I’ve been punching holes in the copper strip so it could be part of the weave.

The prototype bracelet is the one at the bottom of the photo. I torch painted the copper strip to get the red color and left the copper wire its natural color. It will, of course, oxidize later based on the environment. The other two are the first answers to the “how many ways” question. I embellished the one on the top right with some natural turquoise cut in button shapes with two holes. The bracelet on the top left has fewer holes and I cut them all in the center rather than on both sides of the copper strip. It has quite a different look from the other two when viewed close up. Both stone embellished bracelets were dipped in liver of sulphur to which I added a tablespoon of ammonia. It gives it a slightly different patina from plain liver of suphur.

Now the challenge will be in finding other ways to change this basic design without losing its simplicity. I may just have to conger up some basic creative thinking processes to help me continue to vary this design. Hmm . . . there’s something about fluency, flexibility, originality and elaboration . . . and then there were those Six Thinking Hats (DeBono) . . . (so many choices).

Reprinted with permission from the New Braunfels Herald-Zeitung:

Jewelry Lessons  

By Betty Taylor

The Herald-Zeitung

A group of 11 women hammered away Tuesday night at copper wire in the art room at New Braunfels Ninth Grade Center, before holding up tiny loop clasps and comparing their work.

“I’m ready to open a jewelry store now,” said Gail Profant, as she and friend Patricia Schlichting burst out laughing.

The Jewelry Making and Wire Work class was the first of a set of three taught by Dr. Karen Meador of San Marcos as part of New Braunfels ISD’s Community Education program. Meador said she has been making jewelry for about 12 years. She also teaches torch enameling and basic soldering.

On Tuesday, participants learned how to make earrings and a necklace. Techniques included crimping and how to bind beads to wire.

“I’ve always wanted to learn how to make jewelry,” Schlichting said.

Carole Bartram also signed up with friends for the class.

“We just all wanted to learn how to make jewelry and have some fun doing it,” she said.

Meador provided the supplies for the class as well as tips on the best kind of beading wire; how to keep copper from turning color; and keeping beads from popping off of necklaces.

Marilyn Johnson has been making jewelry for more than 10 years, but wanted to take the class to learn more techniques. Chris Newton said she wanted to learn how to repair her own jewelry.

For the next two classes, students will be making chains with S-links and jump rings that they will turn into charm bracelets and necklaces; a “smile” necklace featuring a curved piece of copper set with beads; and a copper wave bracelet embellished with beads.

The bail for the heart on the left is made from a small piece of copper sheet soldered on the back. The one on the right utilizes a bail made from wire, also soldered on the back. My grandson told me that this heart has heartworms! Hmm, I really didn’t see it that way, but I’m not three years old. I used my new leather sand bag as a base for creating the doming effect on both pieces. I dimpled them with dimple pliers. By the way, thanks to a talented friend, I was able to saw the heart shape from the middle of each piece. Thanks Adele!

Following is another photo of a heart pendant made for the same meetup. I torch enameled the copper rectangle and riveted the heart, cut out of the center of a piece shown above, to the metal. I used a tube rivet which gives it some dimension. The back shows the small piece of tube I soldered to the metal for a bail.

The photo below doesn’t seem to fit with this blog entry . . . yet, it is the essence of “heart”. It was commissioned by one adult sister for another in remembrance of their girlhood when they watched the cardinals together. I’ve shared this previously online, but wanted to repeat. Wouldn’t you say the giving sister was “sharing heart”?

As Valentine’s Day approaches, I hope that commercialism doesn’t remove the heart from the giving. It often seems that men, in particular, are harassed by the advertisements to a point where they feel they must spend a good deal of money for their sweeties. I hope the men I know will understand that this woman just wants a little “heart” in one form or another.

After running the Christmas gauntlet of jewelry shows, I wondered if I would have any ideas left for starting anew. I shouldn’t have worried since the holiday’s usually close with renewed inspiration to create again. This year, I’m making an honest effort to add some different looks to my pieces.

One new idea in particular resulted from a metal disc my son-in-law hammered while showing me how to use my new leather sandbag.  While the family tried to rest after Christmas dinner, the two of us sat on my studio floor and hammered. Oh what fun . . . Later, I picked up the disc he made and turned it into a shield.

This shield is on the top left. It has multiple dimensions and weavings and is adorned with turquoise and lapis. The challenge for this piece was adding extra pieces of wire and trying to keep the weaving even. I wasn’t completely successful on the latter.

The shield on the top right sports a sterling silver bezel on textured copper. I added both sterling silver and copper wire to support the weaving.

The bottom piece was simple to make and may need more embellishment before it is complete. I used dimple pliers to create interest on the disc.

The challenge for now is how to best hang these pieces to enhance the look. It would be easy for me to end up with a box full of pendants, but these need to become necklaces soon.

The final photo is of a shield that did become a necklace. It’s too bad that close up shots not only show the flaws in the wire work, but also those on the face! Oh well, I earned every one of them.

My friend from Magpie Gemstones , made a few suggestions and I think the design is working now. Another friend named the above necklace “Sweet Pea”.

Below is another version. You can also see that I’ve played with the use of different size jump rings to add a bit of interest.

My analogy for the initial necklace may be a stretch, but here goes any way. As so many of us gather with family members and/or friends this special time of the year, it seems to me that we are vining. Vines often reach toward their nourishment whether it is sunlight or water and it seems that people do the same. We lean towards those who nourish us by listening, caring and sharing our lives. While we may originally “vine” in one direction, later that part of the growth may wither and we vine in another direction depending upon our needs. I watch my ivy houseplant do the same thing. It grows well in one direction and then I notice it withers and needs trimming. Once trimmed, it angles off toward something else. It doesn’t seem to inhibit the plant as it takes the process in stride. As we traverse our own growth including changes in relationships and in families, it may be important to consider new directions or perhaps to better nurture those old ones. I think we just need to keep vining.

I also remember that my hair wasn’t in very good shape, but we managed to adorn it with a pretty sparkling tiara. It seems to me that it looked much like the one in the photo below (from Tiara Town). It was probably much smaller

That shape stuck with me and I recognized a similarity in the wire shape I made the other night. It became the bracelet below.

I also turned the shape upside down and made a necklace.  If you stand on your head and look at the necklace below, you should be able to see the tiara – or you could just believe me! This particular piece and the bracelet above are both made of moonstone from Magpie Gemstones. I made another similar necklace out of sterling silver wire with grey colored moonstone, but it found a home before I could take a photo.

Today, I tried my hand at a smaller necklace, shown below, that has less loops. I really think I prefer the loopier one. All of these are finished with handmade chain and clasp.

These necklaces are fairly easy to make and the bead placement helps secure the wire loops in place at the top.

I think there are a few more jewelry tiara designs in my future, but I don’t anticipate ever needing to wear one on my head again. I’m either afraid or relieved that those days are past – I wonder which . . .?

This example was made in sterling silver with lovely amethyst stones from Magpie Gemstones (www.magpiegemstones.com) There’s a very long period of time between having something accepted by a publisher and actually seeing it in print. The publication also contains my complete tutorial for the necklace where you can find out the sneaky way I make those tri-loops. These are NOT made on a jig.

My friend, whose sister works for Disney, calls this the hidden Mickey necklace. Just look at all those ears. She purchased one for her sister in copper and it looks great. I was pleased to see it. Someone who read the magazine also sent me a photo of her version of the necklace. If you make one, why not send me a picture too?

Also, I have another piece that should be out in the same publication in a couple of months. I’ll let you know when it’s available.

Many times, I end up “fishin” too, but it’s usually not in a bucket. It’s usually in my head when I’m fishing for ideas. I may be looking for something new and different to add to a design or for some way to solve a problem. This week it was the latter.

I’ve been stuck on making birds lately and have explored how to do it with embossing and torch enameling.

After making a couple of these, I realized that the two don’t mix real well. For embossing, we need a light gauge metal and for torch enamel a heavier metal. When I use the gauge I need for embossing and then enamel the piece, it curves a bit toward the back. Yesterday, while fishing for ideas, I tried riveting another piece of metal to the embossed one and then enameling. It was NOT a good idea. Much of the heat was lost between the layers and I completed a very rough and ugly bird. No, you cannot see it because it’s in the trash. So, I guess I’m going to need to get my idea fishing pole out and try again.

I did, however, have one bird that turned out well. He/she is a sample piece that combines elements from several of the classes I teach, soldering, riveting, wire wrapping, forging, etc. Although you can’t tell from the photo, I used tube rivets to help the bird stand about 1/4 inch away from the back plate. The bird is mixed metal including copper sheet, 1/10 silver wire and brass wire for the nest. Today’s issue is how to make it smaller.

I asked my spouse if he thought I needed eggs in the bird’s nest, but he didn’t think so. We decided that bird was just too young to mate. After all it did just hatch at Dreamcatcher Designs.

Here’s hoping you catch whatever you are fishing for.

I’ve been waving with my wire jewelry for years. I started with a simple wire wave bracelet and continued by making wave necklaces. Originally, these were made from recycled copper wire, but now I use new 14 gauge for the pieces. They’ve also gotten a bit shorter recently. You can see the bracelet contrast in the photo below. Obviously the shorter piece is not yet completed. If you want to make these yourself, I have a free tutorial for the bracelet published on the Magpie Gemstones’ (www.magpiegemstones.com) site: http://www.magpiegemstones.com/wave_bracelet.html

I’ve also tried waving with different shapes.

Here are a couple of versions of the newer wave necklaces. The first features riveted copper charms (faith, hope and love).

The second is embellished with amethyst stones and the wave is a bit more full.

I guess I’ll keep coming back to this standard in my jewelry line and continue to perfect my wave. How about you? What kind of waver are you?