One definition of squared is to set things straight. You can readily see from the new jewelry pieces below that even if I use square beads, I just can’t allow a design to be totally straight. After all, do any of us really want to be called “square?” I don’t want my jewelry to be called square either!

I’ve often thought that square gemstones were difficult to work with, but lately many of them have a nice little extra flair that’s too good to let go. These interesting stones have a slight curve in the middle that eliminates the flat surface usually found on square and rectangular beads. The stones below are jasper on the left and tigereye on the right. The stones in all the photos herein come from www.magpiegemstones.com.

The bracelets shown below may look familiar since they are made just like the dimensional bracelets that I’ve made for several years. I have previously done oval faces on them, but the square fits nicely on the wrist. If you have purchased the Dimensional Bracelet tutorial (,http://www.etsy.com/listing/77795508/dimensional-wire-cuff-bracelet-tutorial?utm_source=custometsywidgetword&utm_medium=api&utm_campaign=api) why not try it with a square stone?

I didn’t get good color in the photo below, but this necklace matches the bracelet above right.

You may have realized that the stones in the first photo are smaller than those in the jewelry shown. I have used the smaller jasper in a bracelet as well, but customers seem to prefer a big square if they’re going to get squared at all. I guess you may as well go all out! Originally, I tried making square wire embellishments atop the square stones, but found the curvilinear specimens more pleasing. They are also easier to create since the sides don’t have to be uniform as in a square. I wonder if this ease affects what I like . . . that bears consideration.

When I looked up the term squared, I thought some of the other definitions might ignite a design idea or two. For example, think about squaring a number and how that might create a design. (2 squared becomes 4 squared and that squared is 16 – you already knew that didn’t you?) I wonder how those numbers could create a design.

Another definition suggested the terms meant putting things at right angles. That too might provide the basis for a design (or have I gone to far). I’ll bet those of you with math anxiety already tuned out!

Whether you want to go mathematical or not, I think you, too, might enjoy designing with these newer square beads: but don’t go too square! People might talk behind your back.

I was multipling for several days this week as I worked on a couple of articles/tutorials for Magpie Gemstones (www.magpiegemstones.com). The first has been published and the second will be out this coming week.

Creating with multiple strands has always been a challenge for me; but this week I remembered a piano pedagogy instructor from a long ago workshop in Dayton, Ohio. She said we should attack our weaknesses. Sometimes I’ve felt I should just avoid my weaknesses, which I prefer to call areas of challenge. This week, however, I heeded that instructor’s words and attacked.

I read the available information online and watched a few videos. Then I commenced to work on my own pieces. When multipling, I had to consider the length of each strand in relation to the others, the bead placement in relation to the strand length and the placement of multiple strand spacers and connectors which somewhat alter strand length. Please don’t ask me how many times I restrung things before I got everything in sync. The two pieces immediately below are thoroughly discussed in Creating Multi-strand Necklaces: Part I http://www.magpiegemstones.com/mutlistrand1.html 

Part II of this discussion, soon to be published, discusses clasps, connectors and spacers for multi-strand pieces. The bib style necklace with leather and the three strand necklace below are featured in that article.

I was enthused enough about multi-strand pieces to go ahead and purchase a fancy clasp for one at the bead show I attended today. It was so pretty, that I decided to use it in the front of the choker style necklace. I don’t make much bling, but I liked this clasp. So, there I sat at the workbench again – multipling.

Now, I need to get back to singling rather than multipling and stop making up new words!

I’ve recently become intrigued with wrap style bracelets and the many variations thereof. They are quick and fairly easy to make and the cost of materials is usually quite nominal. I realize these have been around forever, but the resurgence of them within the broader market causes me to rethink their myriad of possibilities. For example, take a look on the Nordstrom’s website and search wrap bracelets. There you’ll find some rather expensive ones ($128 and up) that don’t look much different than those you see that I’ve made.

There are some good free online tutorials that show the process for wrap bracelets. For example, The following link takes you to the DIY tutorial for the bracelets pictured above: http://www.stumbleupon.com/su/1t8Exa/honestlywtf.com/diy/diy-wrap-bracelet/

These are made with leather, ball chain and waxed linen thread. They’re easy as pie.(not that making a pie from scratch is that easy . . . ) I started making them with the regular silver colored ball chain and then found a package of the colored chain at Hobby Lobby. My customers like the colored chain. I also made, but failed to get a picture before it left home, a bracelet with beads instead of the chain. I simply strung beads, crimping at both ends, and used them in the place of the chain. This is a bit trickier, but provides many color and texture choices. I also made one wherein I used colored cord from the fabric department from . . . you guessed it, Hobby Lobby, . . . in place of the chain.

The second tutorial is slightly more complicated, but still easy. I watched a video on the Auntie’s Beads site http://www.auntiesbeads.com/Wrap-Bracelets-Video_p_9111.html) and then made the turquoise and leather bracelet below. I used 6 lb. test Fireline (from the Walmart fishing department) to make my bracelet. This style provides many options for variation.

I made a bracelet that looks just about like the above, but used a different technique. I hand sewed the seed beads between the leather pieces, again using Fireline. The one below wraps around the wrist four times.

Finally, I “borrowed” the idea for the braided bracelet from the Nordstrom’s website. They show a braided bracelet made with two pieces of leather, using the ball chain as the third braiding element. I didn’t have round leather and used multicolored cord. There’s really nothing novel about the braided version, but I had not thought of using chain it it before. You can just barely see the orange ball chain in the picture below but it’s there. Now I’m wondering about a plethora of other things that could be braided with the leather or cord. Any ideas?

This may not be the kind of wrapping some of you were thinking about from the title. But I just can’t do the other RAP. If you can, go right ahead without me, but I’m sticking to this kind of wrapping and that’s a wrap for today.

Even though I’ve avoided the opportunity to wonder about the bride’s dressmaker or whether she will wear flowers in her hair, I have conjured greatest if I could just design a few of the jewelry pieces for the wedding. Hmm . . . I wonder how the queen would look in a funky metal piece like the one below?

Alas, I guess we’ll never know. (I think a little metal something would be quite charming on one of those hats!)

I did think of that royal couple this week when I opened the mail and found a royalty check from one of my books on creativity. I’m still amazed that people buy something I wrote in 1994 that was published in 1996. It just goes to show that I’d better watch what I say that is published since those words hang on and on.

After receiving that check, I wondered how to perpetuate a jewelry design such that it paid off for as many years as that book. The closest I could think of would be the payoff from tutorials. As you probably know, I have two bracelet cuff tutorials in my etsy shop and, like the books, they bring me some cash from time to time.

I considered whether a design that lives several seasons or even years is a type of royalty. A boutique customer requested a freeform peyote cuff last week. This is something I haven’t made in years, but it still has life.

Now, if I can just remember how I gave it that life!

I can’t say this example is a good analogy to the book royalties since I do have to do the work again. The books and tutorials don’t require anything further.

There is, of course, that option of writing a book about designing jewelry. Yet, I remember how long it takes to put a book together, the pain of dealing with a grouchy editor, the long wait before it goes to press and the tiny percentage an author receives from each book sale. It seems to me that the next time I think I want “royalty”, I’ll just put a floppy hat on my head and go out for a stroll.

This year my initial “new” something comes in the form of Dream Kits. The name was suggested by a friend and it represents a package of metal components that may be purchased as a set. Kits are highly popular in other avenues of bead work. For example, one can easily find seed bead kits that contain all the components needed for a particular design plus the tutorial for making the piece. There are also kits for making chain maille designs that include lots of jump rings in the size required for the included pattern. Yesterday, I listed a couple of handmade chain kits on my etsy site (www.dreamcatcherdesigns.etsy.com) and I’ll be adding more as I produce them.

My thought with these kits is that some excellent designers don’t want to do any wire work, yet would enjoy using handmade components in their pieces. I enjoy making these and can offer a good product. We shall see if there are any takers.

The next kits are going to also have sheet metal components. These may be needed since working with metal requires so many tools and not every one wants to make that investment. I would greatly appreciate your thoughts and suggestions about what types of kits are needed. Do you think it would be better to offer the components separately?

I also wrote a new bracelet tutorial yesterday which will soon be ready for consumers. This flower cuff bracelet tutorial is in the proof reading stage and should be on etsy later in the week.

I’m also trying to learn to use a jewelry saw – currently a slow-go process. My first piano teacher told me to always begin with technique. It appears that the technique of sawing will take some time and practice, practice, practice. I guess its like working on scales on the piano every single day. Practice usually does produce. I find that this practice also requires patience. (My teacher forgot to tell me about that!)

All in all, the nuts and bolts of January 2011 are starting to come together and I’m looking forward to the year’s journey. How about you?

I truly enjoy writing. After I finished my dissertation, I thought I might never like writing another thing, but that didn’t last long. My mind constantly chatters and the words seem to flow more clearly through my fingertips than my mouth. The few books I wrote for teachers were joyful to do because they helped me formulate better teaching procedures for myself. Then, there have been those countless articles I’ve written about parenting, creativity, gifted children, early childhood education, etc. Retiring from my consulting business, I felt all that writing was behind me. Therefore, when my son first suggested several years ago that I begin a blog, I just shook my head; yet, here I am writing a blog! Lately, I’m also truly enjoying writing very short articles for Magpie Gemstones (www.magpiegemstones.com).

Now, I’m trying something new. For a couple of months, friends who were unable to attend the little workshop I held on how to make a dimensional bracelet have asked me to write a tutorial for it. If you’re not in the jewelry making arena, you may not realize that tutorials are popular and contain both directions for making something but also provide a large number of pictures showing the process. After telling people that I “would not” write a tutorial because it would be too much like writing an educational handout or course syllabus, Sunday I wrote one! http://www.etsy.com/listing/64285495/dimensional-cuff-bracelet-tutorial

The tutorial is for the basic bracelet shown in the picture at the top. It features layers of wire on the top part allowing the designer to create depth with the gemstones. You can see it better in the following pictures of another dimensional bracelet made using the same process. Although I had typed the written instructions on Saturday, I worked on this tutorial all day Sunday in order to take and add the 40 or so photos. Who knew it would take so long?

My guest “editors” have read the tutorial and other than a couple of mess-ups, it seems to be ready for use. Perhaps someone will enjoy making it after the holidays when life slows a bit. I’m anxious to see what variations other designers develop for this basic process.

As for the writing . . . creating a tutorial was not nearly as interesting as the other types of writing I like to do. Will there be more? I don’t know as this depends upon the reception for this one. My questions is “does anyone else benefit from or enjoy the results of this type writing?” If so, perhaps there will be more tutorials from this pen.

The real learning I take from this is that I had better quit saying I’m NOT going to do something. Eating my words is not a pleasant meal; I’ve got more interesting things to do!