I’ve truly enjoyed the two jewelry classes that I taught last week, one in Wimberley, TX and the other in San Marcos. I worked with seven women as they learned to make a wrap bracelet in Wimberley and then four more who worked on wrapping cabachons. I enjoyed hearing from the first group about who some of them planned to pass their bracelet to as a gift. I regret not getting a photo of that group, but note the happy intensity on the faces of the second.

It’s common for someone to ask a designer ideas come from. I have no doubt that many of mine come during preparation for teaching. I think that is why it takes me so long to get ready to teach a class. There’s something about this pre-planning that gets my creative juices flowing. I used to fight this urge, trying to stay on task, but now I just go with it. I do, however, have to resist my propensity to want to teach the new idea instead of that which was designated for the class. I just keep wanting to pass it on.

As an example, a couple of gals came over for a little assistance in starting their journey into soldering with a torch. They hardly got off the ranch before I was cutting and planning the piece below. Yes, I know it’s a bit bird-like, but it wasn’t planned that way – oh well, it’s definitely different!

I’ve also done a new soldered design that someone on Facebook suggested is Bohemian. The legs on this piece are soldered to the bottom half of the arc and then wire wrapped. I was tickled that the very first sale of this went to my good friend who often calls and says “is the Dreamcatcher Designs shop open?”  (Of course you know I don’t have a shop!) Sometimes she just runs out to the ranch and gets what she needs. This piece was gifted from her to a co-friend of ours and I’m pleased for her to have it. Do you think you can wear “Bohemian” at the Lutheran Church?

As you read, many things, both concrete and ideational, were passed on last week. From teacher to student, student to teach and friend to friend. I think life was very productive.

Today I happily set out with a small group of errands to run, none of which would be life or season threatening if not accomplished. It’s a very cold day here in Central Texas and I was sure that shoppers would don the Christmas spirit along with their jackets today.

People were actually quite cheery at my first stop; but then I was just finishing up a previously ordered large purchase and they were feeling good about it. The “spirit” of people at my next stop wasn’t quite the same. There were lots of shoppers at Penney’s and they were NOT all smiling. I felt sorry for the little children there who were either being pushed in a store cart or ushered by hand around the building. I was hopeful of finding a smiling child and eventually spotted two. Their dad had them in a double stroller and was tilting it as he tried to convince the little guys that they were flying. I hope the mom, who was shopping nearby, appreciated the delightful squeals of her children.

I also saw a large fellow standing very still as he looked at the women’s slippers hanging on the wall. He just stood there; so I just watched. Finally he removed a carefully folded list from his coat pocket. He put it back and continued to just stand there. Perhaps I should have offered to help, but, knowing that advise sometimes adds more confusion, I just moved on.

Many of the people in the store just looked confused. It’s that time of the season when you can no longer put off choosing what to get for Aunt Margaret or Uncle Harry. I noted that some people look downright angry when they are forced into last minute decisions.

A pair of women, having trouble making a choice, eventually grabbed a garment and determined they could take the one they already purchased back. I think there will be many returns after Christmas and I’m really glad that doesn’t usually happen with the jewelry I sell.

I traveled on to Walmart and kept watching for smiling Christmas shoppers. Several times I observed older couples and thought one or the other of them was smiling. Then I realized that when you’ve lost several teeth, your lips take on a different shape that can look like a smile. (Actually, some looked like frowns.) I hope when my teeth fall out I’m left smiling.

Although I had planned some other stops, I came home right after Walmart. I had collected all the smile data I needed for the day and concluded that the facial expressions I sought just weren’t very abundant. At home, I put the Christmas music on, gave the animals extra treats and put on my own smile. I plan to keep it on my face for many days. This is more important than what I’m giving people. My family may not remember what I gave them for Christmas, but they will probably remember my disposition!

One of the gifts I made best depicts the source of my feelings for the season.

I just need to realize how happiness comes from that which touches my heart and let the cross remind me of the source of the true Christmas spirit. I hope this also puts a smile on your face.

Lately, I’ve seemed to be in need of some of the Division’s spontaneity. At this point in December, I’m feeling a bit spent and my productivity has waned. It’s obvious to me that creativity and productivity are inextricably linked for me. If I’m not producing, I’m not problem solving and therefore am not being creative.

Yesterday, I got a little help with this problem from a friend . . . my mother. When I arrived at the nursing home to visit her, she informed me that it was about time I got there. She had on one earring and was trying to get the other stud on. I couldn’t help but wonder how long she had been at it. We laughed when she was finally “fixed”.

Then I asked her what she wanted for Christmas. Without missing a beat she said, “my TWO FRONT TEETH” and flashed me a big toothless grin. Indeed, her two front teeth are missing and she does need a couple! Again, we laughed and laughed. I think it was her spontaneity as well as her answer that got me. We went shopping together and then grabbed some lunch, but I just kept thinking about her Christmas wish.

This little episode reminded me of last year when we asked her where she was when she and my father got married. Again, without missing a beat, she said, “Out of My MIND!” The woman, who will be 91 in January, is quite clever.

When I got home yesterday, I continued to chuckle and decided to try a bit or jewelry work. That’s when things began to flow nicely and the ideas became present again. Was it just time to design or did the laughter really help. I vote that it was the latter.

I mainly worked with cabochons yesterday, but was pleased with a couple of the new wrappings and the bezel I created.  The first stone is a boulder opal and all the rest are turquoise (yes, even the brown one). See what you think.

I’m hoping to hang on to this productive thinking and continue to get some good work completed. I’m a believer that for me, at least, laughter leads to productivity and creative thinking.

I guess that the moral of this entry is . . . find something to laugh about and if you can’t find anything, go visit my mother!

I hope the season is remaining pleasant for you as it is for me. This year, instead of being cross, I chose to make a cross. One cross led to another and I am beginning to think I should just start a cross store. See what you think. Below are just a very few of those I’ve made.

The plain wire crosses are the easiest to make being composed of two pieces of 14 gauge wire soldered and then wire wrapped in the middle. These are then patinated and textured to provide the look of wood.

The flower-like wire crosses are a little more challenging. I eyeball the shape and occasionally create one that’s not as symmetrical as I would like. Yes, I know that I could use a jig and make them perfect, but that wouldn’t be me. Although you can’t see it very well in this photo the fold formed leaf at the top shares a jump ring with one of this style crosses.

The embellished cross required some problem solving before hatching. I saw a pendant in a magazine that was made by attaching beads to a filigree with wire. I tried this and liked the look except for the back shown below.

This was one big mess! As I pondered how to cover the mess, I, of course, thought about making it into a cross. First I soldered a wire cross onto a sheet metal disc.

Rather than overlapping the wires for the cross, I cut the side pieces and placed them beside the vertical wire. This made the cross a bit flatter. Finally, I wired the decorative filigree to the wire of the cross and finished the piece.

I made a smaller cross, not pictured, by whittling down the filigree piece. This removed the lovely outer curves and I didn’t like it as well.

Finally, I created a scroll type cross using double wires rather than single.

Customers at my last show seemed to enjoy selecting a cross and then choosing either chain or leather to go with it. They also had a choice of selecting a sterling silver cross. I’ve made these in various sizes.

Now it seems that every time I contemplate a new design, I can see the product made as a cross. Yet, I guess this is better than being CROSS! (I think I just heard a loud “Amen” from the other room.)

I’ve tried to approach the use of silver as I learned to do in my Creative Problem Solving workshops by first stating a question. In what ways might I use sterling silver wire and sheet metal to create pleasing designs that are still affordable? There are a number of criteria inherent in that question including using as little material as possible while still producing a good design. The criteria create nice parameters within which to work. If I develop an idea that doesn’t fit the criteria, then I stop and revise it or throw it out. So far things are working reasonably well within this plan.

The pieces in the photos below show several new silver pieces that all required a little soldering. All of these were small enough that the cost was low and they stayed within the parameters for my problem solving. The earrings might have stayed in place without solder, but I wanted the waves in each direction to remain touching. They were bit tricky to solder.

Rings seemed an appropriate project since they don’t require much wire. The original ring with the heart was designed by my friend at Sherry’s Jewels http://Sherrys-Jewels.com. I made a variation that is adjustable and added a little solder to connect the loose end of the heart to the band.

The next ring design, shown with two variations is composed of four wires, each of which I soldered into a circle before placing them together. Each wire is about 1/2 inch shorter in length than the wire outside it. I then fitted each circle of wire inside the other and soldered in appropriate places. This one is adjustable as well. The one on the right is an overlapping version while both ends of the rings are meant to show on the left one.

I used some left over wire to make the wire ring for the leaf necklace. The ring was soldered and then shaped and textured. The leaf is made from the foldforming technique mentioned in a previous post.

I consider this type necklace a collage since the dangles are an eclectic collection or things. This one also features a copper wire dragonfly and hangs from leather.

I have found that silver wire handles a little differently than copper and due to its lower melting point I have to be more careful with the torch. Yet, I think practice will work these things out and soon I’ll be braver about the size and cost of what I’m making.

Speaking of silver . . . I regret to inform you that I found a tiny bit in my hair the other day. I’m fortunate to not yet have to color away any gray and found that little silver on the side snipped right away with the scissors. If you see me out and about one day and note a small bald spot on my head, you’ll understand what happened.

In teaching piano, I found the big to small postulate to be the same. We started with a few large notes in songs and went on to hundreds of small notes and intricate passages. When my friend and I were trying to help little four year olds learn more efficiently, we developed musical notation with relatively large circles and ellipses that most little ones found easy to read. My engineer husband provided us with the appropriate drafting tools to write Keyboard Kapers, a book of original songs we used with the little ones. I wonder how many little pianists played songs about “my dog Blazer” when they were learning from us and the teachers with whom we worked. As the young pianists grew more proficient this notation gradually became the more common smaller notes we see in traditional music.

Having found success with big to large in the aforementioned reading formats, it seemed natural for me to apply this idea to learning to make jewelry. For example, when learning to make soldered bezels, I made large ones first and found they were easier than the tiny ones I’m trying to create now. I currently still have trouble and sometimes melt those little pieces of silver while encouraging my solder to hurry up and flow. Big IS easier!

Fortunately, a couple of my friends recently showed me how to use small premade bezels and snap sets for the tiny stones I wanted to work with. I purchased these from Rio Grande Jewelry Supply. I have always made large pendants, but decided I was ready to grow up to smaller pendants using this new bezel setting technique. My bravery extended as I also used more sterling silver that I usually do.

These pendants were not intended to look like anything in particular. I just wanted a pleasing shape that would house a little jewel. The first and second pictures show pieces that have rubies set in snap sets.

The next couple of pieces show peridot in snap sets. The first one IS NOT a bug!

Finally, I became brave enough to try a larger piece composed of more components. It’s still relatively small compared to most of the copper work that I do. Someone already told me it doesn’t look like my style since it is more formal. See what you think.

The photo on the left was taken from an angle and makes the piece look somewhat “off” Yet, it is symmetrical – my picture taking just isn’t! I wrapped a stone to hang from the basic silver armature and can change this out to other stones with the jump ring attachment.

Big to small is still working for me with one exception. I quickly realized early in learning about wire working that manipulating heavy gauge “big” wire is more difficult for me than working with a lighter gauge “small” wire. When you’re working with wire and have to sound like a tennis player who makes a noise every time she serves, it’s probably time to get a light gauge wire!

I’m making a real effort to focus on flora today and stay away from fauna. If you read the entry titled “Black and White” you know I encountered a skunk on a previous walk. Yesterday, it happened AGAIN! I was watching very closely as I went up the last hill and detected movement in the grass. Yep, there was black and white again. Yes, I did run down the hill AGAIN! 

Also, Bruno the dog just brought me the last of a snake that he or some other heeler consumed in the back yard. There was enough skin left to determine it was a coral. So, with raccoon footprints on my front wooden door, a skunk in my walking path and snakes in the back yard, I’m thinking about moving to town! You’d think I live in the boonies, but you can watch the video on the opening page of the website and see that is not the case (www.dreamcatcherranch.net) .

At any rate, all I can control “habitat wise” is the work in the studio and I hereby proclaim that it will be FLORA! (did I mention the ant and mouse traps I just set?) Flora doesn’t sneak up on you. Flora is graceful. I like flora! Yet, it has to have a little metal twist to it.

While I usually work until a piece is completed, this one spread over two days. Late yesterday, thinking I had all the soldering complete, I pulled this piece out of the pickle and a leaf fell off. With hungry fauna (dogs and spouse) waiting, I set this aside and started again this morning. It has now been resoldered, given a patina and run through the tumbler. I think it’s perfectly secure this time. Now I just need to figure out what type strand to hang this pendant from. Alas, the fun part is over. Yet, there’s more flora on the table . . .

I’m wishing you a good weekend free of black and white fauna and full of beautiful flora.